Mr. Sleeve
Clip on Bottle Cap
Clip on Bottle Cap
Couldn't load pickup availability
A cap that will fit on 20oz bottles to allow an easy way to weight hang. Fill a drink bottle with weight substrate like water (~1lb for 20oz) or steel BB's (~6.5lbs for 20oz), clip in a carabiner and clip into your vacuum cup. Boom! Easy and very adjustable hanging weight.
All caps are drop tested with 6.5lbs of weight to ensure cap will not fail. Made in the US. Colors may vary depending on filament color availability. UPDATE: Filament has been changed to US made PETG. Caps are now stronger than before.
Cap is not water tight.
Have a 3D printer? Great! Have the STL file on the house and print your own!
Print settings
Layer height: .2
supports: touching build plate only
Collapsible content
Details and Usage
Expand below to find out more about our products. From care to shipping.
Handling and Usage
1. Wash silicone products in warm water with mild soap before first use. The silicone is very soft and the powder that is on it from manufacturing will inhibit it's ability to seal against the skin.
2. How to cut sleeve. Hold top of area to be cut between index and middle finger, your fingers should be like scissors. Grip below cut area with you thumb and ring finger, a pinching action. Pull the upper and lower fingers away from each other about 2mm to stretch the sleeve slightly. Cut with heavy scissors or kitchen shears. This should create a very straight cut with no jagged edges. Not cutting the sleeve like this will result in a U shaped cut that will shorten the life of the sleeve.
3. Do not leave silicone products on device. Wash with warm water and mild soap to keep clean. Silicone that is used with lubricant will need to be washed after every use.
Material
Our products are made in the US with US sourced materials. We will sell products imported from China but they will be marked as so.
Shipping
Shipped discretely in a cushioned envelope.